Hervorheben:
Chemische Zusammensetzung:: |
Organosiloxan |
Aussehen: |
Farblos bis gelblich transparente Flüssigkeit |
Dichte g/cm³ (23℃): |
0.85-1.05 |
Wirkstoff (%): |
100 |
Viskosität cps (25°C): |
300 bis 3000 |
Lösungsmittel: |
Fettreich |
Haltbarkeit: |
12 Monate |
Verwendung: |
0,1–0,5 % der 0,1–0,5 % der Gesamtmenge des Beschichtungssystems |
PRODUCT OVERVIEW
Anjeka-7410 is a multifunctional organosilicone additive designed to improve flow and leveling while simultaneously suppressing foam. It moderately reduces surface tension, enhancing film uniformity and minimizing surface defects such as Bernard cells.
TECHNICAL SPECIFICATIONS
Chemical Composition: Aryl-modified polymethylalkylsiloxane
Note: Values listed are typical and should not be treated as precise product specifications.
Appearance: Clear to pale yellow transparent liquid
Solubility: Oily
Density (23°C): 0.85–1.05 g/cm³
Viscosity (25°C): 300–3000 cP
Active Content: 100%
STORAGE & HANDLING
Store in a cool, well‑ventilated area with containers tightly sealed, away from heat and ignition sources. Maintain storage temperature between 0°C and 40°C, avoiding direct heat exposure. Recommended shelf life is 12 months.
COMPATIBILITY NOTE
While exhibiting good general compatibility, stability, recoatability, and shrinkage behavior should be verified in specific formulations prior to full‑scale use.
PERFORMANCE FEATURES
Anjeka-7410 functions as a flow‑promoting leveling agent with supplementary defoaming activity, dependent on coating polarity. It is thermally stable up to 250°C (480°F) and does not compromise intercoat adhesion. The additive enhances surface slip, scratch/abrasion resistance, and prevents Bernard‑cell formation. It also improves the orientation of aluminum flakes and matting agents. Notably, it does not increase gloss, even in challenging high‑solids PU, acid‑cured, or unsaturated polyester systems. In curtain‑coating operations, Anjeka-7410 helps stabilize the coating curtain.
RECOMMENDED APPLICATIONS
Suitable for solvent‑borne coating systems.
DOSAGE GUIDANCE
Typical addition level: 0.1–0.5% on total formulation weight.
Note: The indicated range serves as a starting point; optimal dosage should be established through formulation‑specific testing.
INCORPORATION
May be introduced at any stage of production, provided adequate mixing is ensured.
PACKAGING
25 kg in lined iron drums
200 kg in tight‑head plastic drums
Our Team:
Our company:
Our Certifcate&Patents
Ihre Nachricht muss zwischen 20 und 3.000 Zeichen enthalten!
