EZHOU ANJEKA TECHNOLOGY CO.,Ltd Anjeka@anjeka.net 86-0711-5117111
Einzelheiten zum Produkt
Herkunftsort: China
Markenname: Anjeka
Zertifizierung: ISO9001-2015
Modellnummer: Anjeka6042
Zahlungs- und Versandbedingungen
Min Bestellmenge: 25kg
Verpackung Informationen: 25 kg/Trommel
Lieferzeit: 3-5 TAGE
Zahlungsbedingungen: L/C, D/P, T/T, Western Union
Versorgungsmaterial-Fähigkeit: 100 Tonnen/Monat
Aussehen: |
Hellgelb Flüssigkeit brünieren |
Säurewert: |
(mg KOH/g) 5-40 |
Aminwert: |
(mg KOH/g) 5-40 |
Dichte: |
00,80-1,00 g/cm3 |
Viskosität Cps: |
(25℃) 50-500 |
Wirkstoff: |
100 % |
Produktname: |
Polymer -Dispergiermittel |
Anwendungsbereiche: |
Lösemittelbasierte Beschichtungs- und Druckfarbe mit niedriger Polarität |
Aussehen: |
Hellgelb Flüssigkeit brünieren |
Säurewert: |
(mg KOH/g) 5-40 |
Aminwert: |
(mg KOH/g) 5-40 |
Dichte: |
00,80-1,00 g/cm3 |
Viskosität Cps: |
(25℃) 50-500 |
Wirkstoff: |
100 % |
Produktname: |
Polymer -Dispergiermittel |
Anwendungsbereiche: |
Lösemittelbasierte Beschichtungs- und Druckfarbe mit niedriger Polarität |
Polymer dispersant suitable for dispersing pigments in low polarity coatings.
| Chemical composition | highly branched polymer solution |
| Appearance | Light yellow to brown liquid |
| Acid value (mg KOH/g) | 5-40 |
| Amine value (mg KOH/g) | 5-40 |
| Density g/cm³ (23℃) | 0.80-1.00 |
| Viscosity cps (25℃) | 50-500 |
| Active ingredient (%) | 100 |
The data presented on this data sheet are typical values only and do not constitute technical specifications for the product.
Please stir well before use, delamination or turbidity may occur when the temperature is lower than 0℃, it should be heated to 30℃-40℃ and stirred well before use.
Ceramic Ink Features and Benefits
Anjeka-6402A can be used in low polarity ceramic inkjet inks with hydrocarbon and fatty acid esters, either as a dispersant alone or in combination with other products. This product also helps to shorten the grinding time and filtration time of ceramic colorant slurry, improve productivity, and prepare ceramic inks with Newtonian fluid properties. It helps to improve the storage stability of the colorants in ceramic inks, reduce sedimentation, and improve the vivid color.
This additive is recommended for dispersing colorants in ceramic inks.
Dosage of additives (in purchased form) based on the pigment: 10%-50%.
The optimum dosage should be determined through a series of tests.
For best performance, the additive should be added to the abrasive first, mixed well and then added to the colorant.
We are building a new large-scale production base strategically located in Hubei Province, with an annual capacity of 6,000 tonnes.
The interface additives project was officially established in the Songzi Chemical Park in November 2022.